The Ghost Immobiliser
Immobilisers are a powerful tool to fight vehicle theft. They prevent vehicles from beginning without a key fob and work well to stop hotwiring and other traditional methods of vehicle theft. Newer methods such as key cloning and relay theft are becoming more prevalent.
Created to counter these current trends, the ghost immobiliser works to make your vehicle completely inaccessible. It is silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects to the CAN data network of your vehicle in order to stop key cloning and theft. It is an TASSA approved product and is recognized by insurance companies. It is almost undetectable by thieves and operates silently. It makes use of buttons on your steering wheel, the centre console and doors to create an individual pin code sequence that must be entered before you can start your vehicle. You can create up to 20 different sequences to provide greater security. The system is simple to install and does not require any additional hardware or wiring.
It is recommended to use a reputable installer of CAN immobilisers that is skilled in the specific type of vehicle you have to get the best results. Ideally, they will have a workshop near you where you can visit to complete your installation. You can also find an array of tools and materials that will aid you in the installation. They will have basic hand tools, a multimeter and insulation tape as well as heat shrink tubing to protect connections. A user manual will give you the necessary instructions on how to wire your vehicle.
Connect the battery prior to beginning the installation to prevent short circuits or airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires, since the wrong identification could result in improper system integration. It is recommended to mark the wires using tiny pieces of tape or label them with labels. Also, use a multimeter to verify that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves employ various methods to get around the Ghost Immobiliser. These include blocking and making false signals. These methods work by amplifying the signal transmitted from your key fob to the electronic control unit in your vehicle. With advanced anti-jamming technologies and constant monitoring your vehicle will be protected from these sophisticated attacks.
Security enhancing
Ghost immobilisers provide an extra layer of security to safeguard your car from theft. It works with a PIN code security system that can be entered using existing buttons on the steering wheel or on your dashboard, making it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden within your vehicle, with no LEDs or other signals that could warn thieves of its presence. It communicates with your vehicle's ECU via the data bus, which means it isn't susceptible to the same hacking and relay attacks that can cripple conventional security systems.
It is a great investment for those who have expensive automobiles which are at greater chance of being stolen due to their price and popularity. Its enhanced features protect your car from key copying and ECU swapping. Some ghost immobilisers are also integrated with apps, meaning you can arm and disarm easily. They can also have an option for service/valet that permits you to temporarily disable them while your vehicle is being repaired or serviced.
Ghost immobilisers also have a great feature: it doesn't require any wire cutting. This is a nice option, particularly if you are driving a car that doesn't have immobiliser technology built-in to it. Certain systems can also be integrated with GPS tracking devices, adding an additional layer of security to your car. A GPS tracker can also reduce your insurance rates. If you decide to purchase an immobiliser for ghosts ensure that it is TASSA certified and a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles, safeguarding your vehicle from theft. It creates a unique pin code by pressing buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. It is tamperproof unbreakable and comes with three-year guarantee. It is also fully endorsed by insurance companies. This means you can lower your insurance costs.
The Ghost system differs from the normal immobilisers, which use the key fob to provide ignition control. It is directly connected to the engine controller through the CAN bus. This means it's tamper proof, virtually impossible to remove or disable and cannot be targeted by organized car theft gangs. The Ghost system can also be linked to an iPhone app to monitor remotely and management.
You can create a PIN that is simple to remember, but mathematically impossible to guess for thieves. The PIN can be personalized and modified at any time so that you can keep your car safe even when it's parked on the street or in a public parking lot. You can also set a service or valet mode in case you need someone other than you to drive your car for a brief period, for example when it's in garage for servicing. This feature will also help keep your car from being taken by a shady mechanic. You can opt for an Ghost Call alert to give you additional security. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is an effective security system, securing your vehicle from common theft methods such as key cloning, key stealing and relay attacks. It connects to the car's CAN data network and blocking communication with the engine ECU. This system makes it difficult for criminals to hack or copy your vehicle.
After installation, you'll need to enter a pin number of up to 20 digits in length using the buttons on the dashboard as well as the steering wheel to start the vehicle. The system is completely concealed and unnoticeable to thieves because it does not emit any radio frequency signals. ghost 2 immobiliser cost can be set up using a PIN number that is user-changeable, adding to its security. The system is designed to prevent cutting of circuits, making it virtually impossible to alter.
If you have a problem remembering your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your phone to disarm it immediately. Some come with an option for service or valet that allows you to start your car temporarily, for instance, when you need to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also unnoticeable to thieves as it does not transmit radio signals, a major benefit over other aftermarket car security systems. It is also simple to use and doesn't require complicated wiring. It can be used conjunction with dash cams for added security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired for optimum performance and durability.
Installation
It is crucial to select the most effective immobiliser ghost to shield your vehicle from thieves. This device can help prevent car theft by blocking communication between the engine controller unit (ECU) and key fobs. This device prevents thieves from stealing and cloning the signal to start your vehicle. It also can detect the moment it has been altered with and alert the owner of the vehicle.
The device is simple to install and integrates with the existing systems in your vehicle. It does not require any modification to the vehicle wiring and can be installed in a hidden place like under the dashboard. Follow the steps in the manual to make sure the device is installed correctly. After installation, it's essential to test the system. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to remove the system or bypass it. The installation process typically takes between 2 and 3 hours.
During the process of installation, it is recommended to look up the wiring diagram for the vehicle model you are using. This will enable you to locate the CAN High & the CAN Low wires needed to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure they are secure and insulated.
Once the installation has been completed, you are able to start using the Ghost Immobiliser in a normal manner. It will turn off the ignition of your vehicle if you don't start it with the correct PIN, which is something you can enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode for when you require your vehicle to be cleaned or valet parking.